When removing the sleeve, immediately replace the provided storage cover back over the electrode pads. This step will protect the surfaces of the pads from trapping debris and losing their adhesive quality. The shiny side of the storage cover is the side that should touch the electrode pads.

Before storing your Neural Sleeve, connect the velcro fastenings on the upper and lower leg panels to avoid excessive wear and snagging on the fabric. Gently fold the sleeve and store it in the plastic sheath before putting it in your Carrying Case.

If your electrode pads are losing their stickiness but it’s not yet time to replace them, put a small drop of water on the surface of the pad that makes contact with your skin and rub it around to gently clean and refresh the gel.

When you are due to replace your electrode pads, remove the pads and clean the metal electrode buttons with a damp cloth to remove any residual gel.

Before you put a new set of electrode pads on your sleeve, you can clean your sleeve by laying it flat and spraying with a fabric cleaner. Once complete, let the Neural Sleeve air dry completely before applying new electrode pads and affixing the storage covers.

Note: you do not need to replace all electrode pads every time you need to replace certain panels. If you are only changing a few electrode pads, avoid getting any antibacterial spray on the remaining electrode pads. Make sure all storage covers are firmly in place and no electrode pads are exposed.

We recommend changing out your electrode pads and cleaning your Neural Sleeve at least once every two months.